Gecko Waterlab Kit, Includes Waterlab Chamber, Probe/Sensor, and Intouch 3+, Wifi unit. Monitors, Ph, Orp, and Temperature
$690.62
- Description
- Reviews (0)
Description
0699-500033 – Gecko waterlab Spa Water Monitoring Solution
Product Features and Benefits
- Continuous Water Monitoring: Tracks acidity (pH), temperature and sanitizer level (ORP) around the clock, so you get exact readings without judging test strip colors.
- Alerts and Reporting: Preventive alerts help you catch water problems early and lower the risk of having to replace the water.
- Maintenance Recommendations: Clear, easy-to-follow instructions guide you to clear water, with no chemistry background needed.
- Complete Kit: Comes with the sensing chamber, probe, probe storage bottle, spa-side and home-side modules, Ethernet cable and micro USB power supply, so the main parts are in one box.
- Under-the-Spa Inline Installation: The sensing chamber mounts on a dedicated bypass line, so nothing sits in your spa water and there is no extra work at drain-down or winterizing.
- Flexible Plumbing: The chamber has no set flow direction, so the inlet and outlet can go on either valve, and the deviation line can use 3/8″, 1/2″ or 3/4″ tubing.
- Always-Wet Chamber Design: Reduced water flow and a chamber that stays wet are built to get the most life out of the probe.
- Long-Life All-in-One Probe: One probe handles all the measurements and is designed to be replaced only about once every four years.
- Minimal Calibration: The probe is calibrated once over its life, after about two years of use, using the steps in the Gecko app.
- Test Strip Support: Strips are still used for first-time calibration, periodic rechecks and readings the probe does not cover, and recommended strips can be ordered in the Gecko app.
- Status LED on Modules: A status light on each module makes it quicker to check the connection and troubleshoot.
Product Specifications
- Manufacturer: Gecko Alliance
- Measures: pH, temperature and sanitation (ORP)
- Probe Life: 4 years
- Calibration: Once over the life of the probe (after two years of use)
- Kit Includes: Spa module (CO), home module (EN), Ethernet cable, micro USB power supply, waterlab probe, probe storage bottle, waterlab chamber
- Control and Monitoring: Gecko app
- Connectivity: in.touch 3+, radio frequency link between modules
- Radio Frequency: 915 MHz (FCC, North America models); 868 MHz (ETSI, Europe models)
- App Compatibility: Devices running iOS 8.0 or higher, or Android 2.3 or higher
- Compatible Spa Systems: In.YT- V2, In.YE-V2, V3 and In.YJ-V2, V3 spa systems manufactured in or after 2012
- Router Requirement: Standard router with an open 100 Mbps wired LAN (RJ45) port and port 10022 open; 3 ft (0.9 m) Ethernet cable included
- Chamber Max Pressure: 18 psi
- Minimum Recommended Chamber Flow: 0.5 GPM
- Deviation Line Tubing: 3/8″, 1/2″ or 3/4″ recommended; barb fittings provided on the two valves
- Chamber Placement: After the filter and before any water treatment device such as a UV unit or ozonator
- Chamber Orientation: Probe and valves within +/- 5 degrees of vertical; must stay reachable for valve use, draining, probe installation and pressure gauge reading
- Chamber Mounting: Two #8 screws through the support holes, or two 8-32 screws in the fixings at the back of the support
- Spa Module Mounting: Under the spa skirt, as high as possible and facing the home router, at least 12″ (30 cm) from any metal; secured with a #8 pan head screw and plugged into an open CO port at the end of the CO chain
- RF Exposure Distance: Keep at least 8″ (20 cm) between the in.touch 3 modules and people during operation
- Humidity: Up to 85% noncondensing
- Waterproofing: IPX5
- Startup: Readings should settle within 30 minutes after water begins circulating in the chamber
Dimensions and Weight
- Chamber (approx.): 9.05″ W x 9.02″ H x 4.25″ D (229.87 x 229.11 x 107.5 mm)
- Probe (approx.): 10.02″ (264.66 mm) long; 2.4″ (60.96 mm) at widest point
- Spa Module (in.touch 3+ CO): 5.31″ x 3.87″ x 1.65″ (134.9 x 98.3 x 41.91 mm)
- Home Module (EN): 3.24″ x 2.76″ x 0.96″ (82 x 70 x 24 mm)
- Weight: Probe 552.5 g; chamber 618 g; in.touch 3 module 320.5 g; EN module 63.5 g
Temperature Requirements
- Probe Operating and Storage Temperature: 32°F to 176°F (0°C to 80°C)
- Probe Handling: Keep above 32°F (0°C) and avoid air exposure longer than 15 minutes
- Operating Temperature (waterlab): -4°F to 140°F (-20°C to 60°C)
- Storage Temperature (waterlab): -22°F to 185°F (-30°C to 85°C)
Electrical Information
- Power Requirement: EN module 5 Vdc / 510 mA; Gecko waterlab 12 Vdc / 70 mA
- Home Module Power Supply: Needs a nearby mains outlet (120 V in North America, 220 V in Europe); micro USB power supply included
Accessories
- 0616-521001 – Replacement Water Chamber
- 0608-521041- In.Touch3+ Wifi Kit
- 9960-400001 – Sensor Probe – PH, Orp, Temperature
- 0605-500010 – In.Clear Bromine Salt Generator
- 0607-008010 – In.k200 Topside for In.Clear Bromine Salt Generator
- 0699-300005 – Bromicharge – Sodium Bromide for In.clear
- 0699-300007 – In.clear Reducer from 2″ to 3/4″








Reviews
There are no reviews yet.